Us remington model 1903 serial numbers. US Remington model 1903

Us remington model 1903 serial numbers Rating: 7,6/10 876 reviews

Correct Springfield Armory Model 1903 Mark I Information, Value (M1903, Mk I, Mk1)

us remington model 1903 serial numbers

However, some of the information on stock markings is now obsolete or incorrect. An unknown but significant number of Mark I rifles were subjected to rigorous period testing, and may have required barrel replacement contemporaneously with new production. Also, seems I've heard some 1903's are dangerous to shoot full power modern loads in due to heat treat, can anyone tell me if mine is one of those? I have similar sentiments about mine. Changes were made to speed production without compromising the accuracy strength and efficiency of the rifle. Several avenues were explored, including discussions with Remington Arms Company for the production of rifles under British contract. And definitely try to get photos uploaded.

Next

Remington 1903A3 Serial Number List ?

us remington model 1903 serial numbers

When Remington was on a roll making 1903A3s, Uncle Sam stepped in again and said they wanted Remington to step up production of their 1903A4 Sniper Rifle variant. The face of the trigger is smooth, as the serrated trigger had been temporarily discontinued throughout the span of Mark I production. The bolt is polished however is not marked with the rifles serial number. Know the trends for your particular market. Some photos are limited in size to facilitate ease of reading.

Next

Correct Springfield Armory Model 1903 Mark I Information, Value (M1903, Mk I, Mk1)

us remington model 1903 serial numbers

A gas escape hole was drilled into the left side of the receiver as had been done at Springfield Armory since 1936. Original smooth dark parkerized finish with some blue finish small parts. Military between 1903 and 1945. If you have read this far, you will be an informed buyer and ready to make a better purchase decision. There were no deaths reported from the failure of a Springfield receiver. The folks at Remington figured out how to speed up production by using some stamped parts and some crude machine work.

Next

1903 and 1903A3 Production and Serial No table.

us remington model 1903 serial numbers

This is the rarest of the National Matches I do not know or have the numbers. Also, it is noted that final rifle assembly followed receiver serialization by an approximate average of 2 weeks. Modern day collectors use different terminology than did the U. Hence, we see a fair number of barreled receivers today which appear to have original finish, but with barrel dates from early to mid-1918 which significantly precede the start of Mark I receiver production in late-1918. Thanks for looking and listening. The stamped and sheet metal parts were phased in over a period of approximately a year, and the A3 variant was authorized about mid-1942.

Next

M1903 Springfield serial number stock cartouche list

us remington model 1903 serial numbers

The non-serrated trigger has a dual sear function, one for firing as a normal 30-06 with the original bolt, and the other for the. As a collector who buys and sells many military firearms, I am not shooting from the hip. It is also machined with a single locator hole for the cut-off set screw, instead of a groove around the entire diameter of the shaft. I own both 2-1918's Springfields and 2-1942's Remingtons, and the Remingtons have been by far the more accurate with both M1 and M2 Ball and M-72 Match ammunition. Receivers and barrels were produced in lots, and the parts could be randomly pulled from production bins at assembly. Remington ceased production of the M1903A3 in February 1944 and continued with M1903A4 production until June of the same year. The production start date is not known- maybe late 1942.

Next

US Remington model 1903

us remington model 1903 serial numbers

The machined recessed portion of the switch is commonly referred to as a W-shape. Other sources Canfield and Eger cite Mark I production at 101,775 units. The M1903 was manufactured by Springfield Armory at varying levels of production from 1903 until the late 1930s and at Rock Island Arsenal from 1903 until 1913 and again from 1917 until just after World War I. So if you think you own say a 1919, 1920, 1921 or 1922 National match another indicator would be the serrated trigger. Most Mark I rifles over 95% by my estimate have been stripped of their adaptive parts which mate with the Pedersen Device. But for the average gun collector, it is very difficult to locate valuable and encompassing information in one stop.

Next

Found me a 1903 Springfield, but its a Remington!

us remington model 1903 serial numbers

From 1907, the Armory reported the first serial number of the year. Between July and December 1917 eleven rifle receivers shattered, causing one severe and 10 minor injuries to the soldiers using the rifle. Some have stated emphatically no rifle with a low numbered receiver should ever be fired under any circumstance because of the risk of serious injury or death, but that high numbered receivers are perfectly safe. The Mark I set screw is longer than a standard set screw, and has a reduced diameter locator pin machined below the threaded end. Interestingly, Smith Corona beat Remington into 1903A3 production by almost four months! This recess is by far the easiest feature to fake, as all it requires is removal of wood.

Next

Remington Model 1903

us remington model 1903 serial numbers

Marine Corps in some of the early Pacific campaigns. There were problems with early single heat treated recievers, but that was cured and double heat treated reciever are just fine as are all later recievers. This report reconciles in finality all rifle inspection approval issues that may have remained after close of each monthly billing period. Q6: Is a Mark I safe to shoot? The two-crossbolt, grasping-groove S-stock with smooth buttplate also has a milled recess directly under the ejection port on the left side of the receiver. All original arsenal assembly, original finish and near 100% condition.


Next

US Model 1903 Springfield Rifle Serial Number Ranges

us remington model 1903 serial numbers

Smith-Corona signed the contract to make M1903a3 Rifles in May, 1942. Nothing wrong with a Remington. I need to know the approximate value, as I am selling it soon. Since no effort was made to use the receivers in numerical order, considerable variance exists between the number of rifles built and the number of serial numbers struck. Representatives from the Ordnance Department visited the factory and determined the company was spending too much time on unnecessary or cosmetic features of the rifles. I hope it was entertaining, as well.

Next